DTF UV - Think

Home
>
Plotters
>
DTF UV

What is UV DTF printing and how does it work?

UV DTF (Direct to Film UV) printing is an innovative technique that allows transferring designs onto multiple surfaces (glass, metal, wood, plastic, leather, etc.) using UV inks and ultraviolet light curing, without the need for heat.

Our products

Plotter UV 3040

1 cabezal Epson I3200
- SPEED
  0.28 m²/h - 3 m²/h
- MEDIA
  Glass, plates, various signs, crystal...
Maintenance
- Daily Power On and Circulation Even if you're not printing, turn it on every day to circulate the UV ink and prevent it from hardening inside the printhead.
- Cleaning the Wiper, Cap Station, and Surrounding Area Do this daily. UV ink is thicker and crusts up quickly, clogging the nozzles.
- Avoid Direct Light on the Ink UV inks are cured by light. Keep the cartridges and the plotter area away from sunlight or external UV lights.
- Nozzle Check 1–2 Times a Day UV ink tends to dry faster. You detect any cuts before they affect a job.
- Manual printhead cleaning (only when necessary) Do this with UV cleaning solution and a lint-free cloth. Never use alcohol.
- Proper ventilation of the work area UV inks emit fumes. A well-ventilated environment improves the life of the equipment and the health of the operator.
Max width: 420mm

Speed: 3 m2/h

Media: Glass, plates, advertising signage, crystal, PVC, acrylic, synthetic leather, etc.

See more

Request a quote
DTF UV (30cm)

3 cabezales Epson I1600
Maintenance
- Daily power-on and circulation Even if you don't print, turn it on every day so the UV ink circulates and to prevent it from hardening inside the printhead.
- Cleaning of the wiper, cap station, and surrounding areas Do this daily. UV ink is thicker and forms crusts quickly, which clogs the nozzles.
- Avoid direct light on the ink UV inks cure with light. Keep cartridges and the plotter area away from direct sunlight or external UV lights.
- Nozzle test 1–2 times per day UV ink tends to dry faster. This detects any clogs before they affect a job.
- Manual cleaning of the printhead (only when necessary) Do it with UV cleaning solution and a lint-free cloth. Never use alcohol.
- Adequate ventilation of the work area UV inks emit vapors. A ventilated environment improves equipment lifespan and operator health.
Max width: 320mm

Speed: 7 m2/h

Media: Film A (with adhesive) + B

See more

Request a quote
DTF UV (60cm)

3 cabezales Epson I3200
Maintenance
- Daily Power On and Circulation Even if you're not printing, turn it on every day to circulate the UV ink and prevent it from hardening inside the printhead.
- Cleaning the Wiper, Cap Station, and Surrounding Area Do this daily. UV ink is thicker and crusts up quickly, clogging the nozzles.
- Avoid Direct Light on the Ink UV inks are cured by light. Keep the cartridges and the plotter area away from sunlight or external UV lights.
- Nozzle Check 1–2 Times a Day UV ink tends to dry faster. You detect any cuts before they affect a job.
- Manual printhead cleaning (only when necessary) Do this with UV cleaning solution and a lint-free cloth. Never use alcohol.
- Proper ventilation of the work area UV inks emit fumes. A well-ventilated environment improves the life of the equipment and the health of the operator.
- Cooling system maintenance Check the water in the chiller or printhead cooling system. If the cooling fails, the printhead can be damaged in minutes.
Max width: 620mm

Speed: 10 m2/h

Media: Film A (with adhesive) + B / Film A (without adhesive) + B

See more

Request a quote
M TU Tech UV 9060

3 cabezales Epson I3200
Maintenance
- Daily Cleaning of the Printhead Resting System Clean the wiper, cap station, and printhead rim every day. UV ink forms crusts that can clog nozzles if not removed promptly.
- X/Y/Z Axis Lubrication Apply appropriate lubricant every 1–2 weeks. Clean axes prevent vibrations and lines in the print.
- Avoid Ambient UV Light UV inks cure with light. Avoid exposing the print bed or cartridges to direct sunlight or external UV light.
- Flatbed Cleaning Keep the surface free of dust, adhesives, or material residue. Any residue can affect printhead height or damage the nozzle.
Max width: 600mm

Speed: 16 m2/h

Media: Glass, Acrylic, Tile / Ceramic Tile, Aluminum, iPhone Cases, Plastic, Foam Board, Wallpaper, Wall Art, Advertising Signage, Metal, Paper, Wood, MDF, Furniture, Cards, Marble, Golf Products, Gift and Promotional Items, Leather, PU, PMMA, PVC, PP, PE, PTFE, Plexiglass, Panels, Ceilings, Cardboard, Corrugated Cardboard, Chevron Panel, Fiberboard, Brick, Stone, Home Décor, Appliance Panels, Ceramic and Porcelain Tile, 3C Products, Oil Painting, Fresco, Sliding Doors, Photos, Marking and Signage, Exhibition / Trade Show Stands, etc.

See more

Request a quote

Frequently Asked Questions

1. How is the design created for DTF UV?

The design is created in graphic software such as Photoshop or Illustrator, prepared in high resolution and ready to be printed on rigid surfaces like glass, metal, plastic, or wood.

2. What type of printing does the DTF UV technique use?

Printing is done on a special PET film using a UV DTF printer with UV inks. In some cases, UV varnishes or adhesives are also added to create volume or a 3D effect.

3. What does it mean that the ink is cured with UV light?

This means the ink dries and hardens instantly with ultraviolet light, making it resistant to abrasion and ready to be transferred without the need for drying time or heat.

4. How is the design transferred to different surfaces?

The cured design is transferred using pressure or adhesive onto surfaces such as glass, metal, wood, leather, or plastic, without using heat, making it ideal for sensitive materials.